✨ New Arrivals Just Dropped!Explore
HomeStore

STAGE 1 PERFORMANCE UPGRADE TO SUIT HOLDEN CAPRICE WM ALLOYTEC SIDI LY7 LWR LLT LFX 3.6L V6

Product image 1

STAGE 1 PERFORMANCE UPGRADE TO SUIT HOLDEN CAPRICE WM ALLOYTEC SIDI LY7 LWR LLT LFX 3.6L V6

This Mace ETC and K&N's air filter have been put together to meet the performance upgrade requirements of Holden vehicles fitted with the I4 engines.

Mace ETC eliminates the delay that exists between the throttle pedal and the butterfly in the throttle body, re-establishing throttle response and bottom-end acceleration while improving low torque. There are different performance modes in this ETC that helps you to increase throttle response and improve overall drivability.

The K&N replacement air filter is designed to boost the horsepower and acceleration while providing superior filtration. It is washable and reusable and is custom designed to fit into your existing factory air box. This filter lasts up to 80,000km before cleaning is required depending upon driving conditions. It comes with K&N million mile limited warranty and it will not void vehicle warranty.


Modes of ETC:

  • Sport Mode: 9 stages of increased accelerator response suited for spirited driving.
  • Economy Mode: Reduced accelerator response suited for economy driving around towns and on highways.
  • Normal Mode: Factory throttle response.


ETC Features:

  • OBD.II free, meaning power is sourced directly from the pedal and additional plugs are no longer required.
  • Temperature ranges from -40 to 125 °C.
  • Previously set stage numbers are retained thanks to Power off memory function.
  • Digital signal output AD/DA up to 10 Bit, efficiently responds to the original throttle signal.


Air Filter Specifications:

  • Air filter shape: Panel
  • Outside length: 13 in (330 mm)
  • Outside width: 9.5 in (241 mm)
  • Height: 0.875 in (22 mm)


Contents:

  • 1 X Mace ETC
  • 1 X K&N Air filter

Vehicle Fitment Guide

PP649-VFG


Notes:

  • Installation of the Mace ETC is quite simple and the modification is completely reversible within a couple of minutes. All kits include simple fitting and calibration instructions.
  • The air filter included in this package can be purchased separately through another listing.
  • The ETC included in this package can be purchased separately through another listing.
$169.85
STAGE 1 PERFORMANCE UPGRADE TO SUIT HOLDEN CAPRICE WM ALLOYTEC SIDI LY7 LWR LLT LFX 3.6L V6
$169.85

Product Information

Shipping & Returns

Description

This Mace ETC and K&N's air filter have been put together to meet the performance upgrade requirements of Holden vehicles fitted with the I4 engines.

Mace ETC eliminates the delay that exists between the throttle pedal and the butterfly in the throttle body, re-establishing throttle response and bottom-end acceleration while improving low torque. There are different performance modes in this ETC that helps you to increase throttle response and improve overall drivability.

The K&N replacement air filter is designed to boost the horsepower and acceleration while providing superior filtration. It is washable and reusable and is custom designed to fit into your existing factory air box. This filter lasts up to 80,000km before cleaning is required depending upon driving conditions. It comes with K&N million mile limited warranty and it will not void vehicle warranty.


Modes of ETC:

  • Sport Mode: 9 stages of increased accelerator response suited for spirited driving.
  • Economy Mode: Reduced accelerator response suited for economy driving around towns and on highways.
  • Normal Mode: Factory throttle response.


ETC Features:

  • OBD.II free, meaning power is sourced directly from the pedal and additional plugs are no longer required.
  • Temperature ranges from -40 to 125 °C.
  • Previously set stage numbers are retained thanks to Power off memory function.
  • Digital signal output AD/DA up to 10 Bit, efficiently responds to the original throttle signal.


Air Filter Specifications:

  • Air filter shape: Panel
  • Outside length: 13 in (330 mm)
  • Outside width: 9.5 in (241 mm)
  • Height: 0.875 in (22 mm)


Contents:

  • 1 X Mace ETC
  • 1 X K&N Air filter

Vehicle Fitment Guide

PP649-VFG


Notes:

  • Installation of the Mace ETC is quite simple and the modification is completely reversible within a couple of minutes. All kits include simple fitting and calibration instructions.
  • The air filter included in this package can be purchased separately through another listing.
  • The ETC included in this package can be purchased separately through another listing.

You may also like

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN CREWMAN VZ ALLOYTEC LE0 3.6L V6

$26.49

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN STATESMAN WL WM ALLOYTEC LY7 3.6L V6

$26.49

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN RODEO RA ALLOYTEC LCA 3.6L V6

$26.49

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN ONE TONNER VZ ALLOYTEC LE0 3.6L V6

$26.49

NEW
Thumbnail 1

MACE UPPER INTAKE MANIFOLD GASKET SET TO SUIT HOLDEN RODEO RA ALLOYTEC LCA 3.6L V6

$20.73

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN CAPTIVA CG ALLOYTEC LU1 3.2L V6

$26.49

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN COLORADO RC ALLOYTEC LCA 3.6L V6

$26.49

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET FOR HOLDEN COMMODORE VZ VE VF ALLOYTEC LY7 LE0 LW2 LWR 3.6L V6

$26.49

NEW
Thumbnail 1

MACE LOWER INTAKE MANIFOLD GASKET TO SUIT HOLDEN CAPRICE WL WM WN ALLOYTEC LY7 LWR 3.6L V6

$26.49

NEW
Thumbnail 1

MACE INTAKE MANIFOLD GASKET TO SUIT HOLDEN SIDI LFX LF1 LFW 3.0L 3.6L V6

$27.06

NEW
Thumbnail 1

MACE MANIFOLD GASKET AND SPARK PLUG KIT TO SUIT HOLDEN CAPRICE WM SERIES II WN ALLOYTEC LWR 3.6L V6

$66.21

NEW
Thumbnail 1

MACE MANIFOLD GASKET AND SPARK PLUG KIT TO SUIT HOLDEN COMMODORE VE.II VF ALLOYTEC LWR 3.6L V6

$66.21

STAGE 1 PERFORMANCE UPGRADE TO SUIT HOLDEN CAPRICE WM ALLOYTEC SIDI LY7 LWR LLT LFX 3.6L V6 | Mace Engineering Group