SAAS 4X4 DIFFERENTIAL BREATHER KIT TO SUIT NISSAN PATHFINDER R51
SAAS Trax series differential breather kit is a must for 4wd vehicles that frequently wade through water. This kit has been designed to elevate the breathing ports in the differential, allowing the air inside them to contract due to being submerged in cool water, without water entering in them.
This breather kit has 2 ports for front and rear diffs and 2 ports for gearbox and transfer case if required.
Key Features:
- Stops water entering your differentials, transmission and transfer case.
- Billet machined aluminium manifold.
- Rear mounted washable filters sit out of sight and away from the elements.
- Universal compact design.
- All ports are isolated and protected from contaminating the other in the event of mechanical failure or flow back.
Specifications:
- Thread size: 1/8"BSP
Contents:
- 01 x Manifold Block
- 01 x M6 bolt x 35mm
- 01 x M6 washer
- 01 x 8mm polyethylene hose 12M length
- 02 x 8mm polyethylene hose (spring style) 2M length
- 02 x 1/8" BSP plug block off nut
- 04 x 8mm to 8mm push in joiner
- 04 x 8mm to 1/8" BSP elbow push in fitting
- 04 x 1/8" BSP brass filter (silencer)
- 06 x 8mm straight push in fitting
- 30 x cable ties
- Fitting instructions
Vehicle Fitment Guide
Notes:
- Full comprehensive fitting kit included.
- Some vehicles may have a different thread size or factory breather style and may require an adaptor or custom made solution. Please check the thread sizes first before making a purchase.
- Please make sure that the air filters in this kit are not obstructed in any way as incorrect fitting can cause damage to the differential or gear box.
- Once installation is complete, you should have some left over hose that can be used with the supplied hose joiner fittings to make an emergency repair kit, if needed when off-roading.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
SAAS Trax series differential breather kit is a must for 4wd vehicles that frequently wade through water. This kit has been designed to elevate the breathing ports in the differential, allowing the air inside them to contract due to being submerged in cool water, without water entering in them.
This breather kit has 2 ports for front and rear diffs and 2 ports for gearbox and transfer case if required.
Key Features:
- Stops water entering your differentials, transmission and transfer case.
- Billet machined aluminium manifold.
- Rear mounted washable filters sit out of sight and away from the elements.
- Universal compact design.
- All ports are isolated and protected from contaminating the other in the event of mechanical failure or flow back.
Specifications:
- Thread size: 1/8"BSP
Contents:
- 01 x Manifold Block
- 01 x M6 bolt x 35mm
- 01 x M6 washer
- 01 x 8mm polyethylene hose 12M length
- 02 x 8mm polyethylene hose (spring style) 2M length
- 02 x 1/8" BSP plug block off nut
- 04 x 8mm to 8mm push in joiner
- 04 x 8mm to 1/8" BSP elbow push in fitting
- 04 x 1/8" BSP brass filter (silencer)
- 06 x 8mm straight push in fitting
- 30 x cable ties
- Fitting instructions
Vehicle Fitment Guide
Notes:
- Full comprehensive fitting kit included.
- Some vehicles may have a different thread size or factory breather style and may require an adaptor or custom made solution. Please check the thread sizes first before making a purchase.
- Please make sure that the air filters in this kit are not obstructed in any way as incorrect fitting can cause damage to the differential or gear box.
- Once installation is complete, you should have some left over hose that can be used with the supplied hose joiner fittings to make an emergency repair kit, if needed when off-roading.
